Interlock Armored Fibers Optic AS OPPOSED TO Innerduct along with Classic Fiber Cabling

Installing a fiber optic cabling system can be quite a great addition to your network infrastructure. Among the main what to consider when beginning this job is the technique in which to guard the delicate fiber optic cable from potentially harmful environmental variables. Commonly, an innerduct is used to house and protect the cable. The innerduct is just a corrugated HDPE tube that surrounds the cable, acting as a shield for damage and reinforcing the bend radius of the cable. While this technique is incredibly effective in the protection of your cable, it is also an even more frustrating task. This is because the innerduct must first be installed throughout the facility that the fiber cable is likely to be going into. Once the innerduct is fully installed, it is then time to set up the fiber optic cable.

The fiber optic cable is pulled through the innerduct, installed and terminated as usual. In conclusion this technique, you are basically performing two installations: the installation for the fiber optic cable and the installation for the protective innerduct. Although innerduct is a great, reliable investment for cable protection, the above mentioned mentioned factors can equate to raised installation costs. Not merely do you pay more for the physical innerduct material, the full time it takes to set up the innerduct also presents additional time and labor costs. Installation fibre optique  Wouldn’t it be easier and more affordable if the optic cable might be installed with its own built in protective shield? Well what’s promising can it be can be. Armored fiber optic cable can be acquired instead to having an innerduct. With armored fiber, there is no requirement for multiple construction processes. The armored fiber is made with multiple layers of protection and extra reinforcing in the cable housing to avoid damage. Armored fiber cable offers:

Basically, armored fiber cable retains just as much protection reliability as with an innerduct, but for potentially less money and construction time. However, every rose has its thorn, by choosing to use armored fiber you might be saving time and money, but certain sacrifices must be made as well. When you install an innerduct, one of the main benefits is it is a cabling pathway and could be reused should you’ll need to replace the cable or add new fiber capacity.If the innerduct hasn’t reached its fill ratio, the additional space left within the innerduct makes for another cable to be run through the prevailing innerduct thereby maximizing your investment. Should you need to do the same thing with armored cable, you will incur the price of having to buy and install new armored cable, which will be more costly than standard fiber optic cable.

Important what to consider:

It is important to take into account this when coming up with your choice on whether to go with armored fiber cable or innerduct. While both are excellent types of cable protection, it is vital to analyze your fiber cabling needs for both the present and the future, and make your choice based about what your specific requirements are, making sure to policy for potential changes which could occur involving your fiber optic network infrastructure.

Xetra Networks Inc. is just a San Diego Low Voltage and General Building contractor that designs and installs telecom solutions. We specialize in voice cabling, data cabling, fiber optic cabling, VOIP, wireless, computer rooms, server rooms, and surveillance systems in San Diego, as well as the whole southern California Region.

Leave a Reply

Your email address will not be published.